Inhaltsverzeichnis
Hersteller
HP-UX
Infos zum Gerät
SNMPTT Config
EVENT hpEMSNormalEvent .1.3.6.1.4.1.11.2.3.1.7.0.1 "Status Events" OK FORMAT The Event Monitoring Service (EMS) has generated an event $* SDESC The Event Monitoring Service (EMS) has generated an event for a monitored resource. A Normal Event occurs when the value of the resource is in a 'normal' state and the threshold condition is not true. Monitoring requests configured for initial or return notification may generate this event. Also, the initial notification for a Change event is 'normal'. The data passed with the event: 1) The name of the resource being monitored. 2) The request id, a unique identifier for the monitoring request. This value should be used when using resdata to retrieve additional information about the event. 3) The operator used by EMS to determine when event notifications should be sent. Possible values include: poll, change, >, >=, <, <=, = and !=. 4) The resource type, which defines the type of value being monitored. Possible values include: string, enumerated, integer, and float. 5) The resource value, which is the current value of the resource being monitored. It is converted based on the resource type. 6) The threshold type (usually the same as the resource type) defines the type of value configured for the threshold. Possible values include: string, integer, and float. 7) The threshold value configured for the resource being monitored. 8) The user data flag, which indicates whether or not user data are available. User data are comments provided by the user when the request was configured. User data can be retrieved on the source node by running: /opt/resmon/bin/resdata -r <resource name> \ -R <request id> -u 9) The monitor data flag, which indicates whether or not the monitor has additional data regarding the event. Additional data provided by the resource monitor can be retrieved on the source node by running: /opt/resmon/bin/resdata -r <resource name> \ -R <request id> [-n <notify id>] -m 10) The notification trigger indicates if the resource condition is normal or not. For an EMSNormalEvent trap, the notification trigger is normal. 11) The event type indicates the type of notification being sent. The different types are: Poll - for notification at every interval Change - for notification when the value changes Normal - for notification when the threshold condition for the resource is not true Problem - for notification when the threshold condition for the resource is true Error - for notification when the monitor encountered an error determining the resource value 12) The notify id, a unique identifier for a specific notification event. This value should be used when using resdata to retrieve additional information about the event. Monitor data can be retrieved on the source node by running: /opt/resmon/bin/resdata -r <resource name> \ -R <request id> [-n <notify id>] -m Variables: 1: hpEMSResourceName 2: hpEMSRequestID 3: hpEMSOperator 4: hpEMSResourceType 5: hpEMSResourceValue 6: hpEMSThresholdType 7: hpEMSThresholdValue 8: hpEMSUserDataFlag 9: hpEMSMonitorDataFlag 10: hpEMSNotificationTrigger 11: hpEMSEventType 12: hpEMSNotifyID EDESC EVENT hpEMSProblemEvent .1.3.6.1.4.1.11.2.3.1.7.0.2 "Status Events" WARNING FORMAT The Event Monitoring Service (EMS) has generated an event $* SDESC The Event Monitoring Service (EMS) has generated an event for a monitored resource. A Problem Event occurs when the threshold condition defined for the resource is true. A Change Event occurs when the monitored value changes. Monitoring requests configured for notification when the value changes may generate this event. A Poll Event occurs regularly at the configured polling interval. An Error Event occurs when the value of a monitored resource cannot be obtained from the monitor. The data passed with the event: 1) The name of the resource being monitored. 2) The request id, a unique identifier for the monitoring request. This value should be used when using resdata to retrieve additional information about the event. 3) The operator used by EMS to determine when event notifications should be sent. Possible values include: poll, change, >, >=, <, <=, = and !=. 4) The resource type, which defines the type of value being monitored. Possible values include: string, enumerated, integer, and float. 5) The resource value, which is the current value of the resource being monitored. It is converted based on the resource type. 6) The threshold type (usually the same as the resource type) defines the type of value configured for the threshold. Possible values include: string, integer, and float. 7) The threshold value configured for the resource being monitored. 8) The user data flag, which indicates whether or not user data are available. User data are comments provided by the user when the request was configured. User data can be retrieved on the source node by running: /opt/resmon/bin/resdata -r <resource name> \ -R <request id> -u 9) The monitor data flag, which indicates whether or not the monitor has additional data regarding the event. Additional data provided by the resource monitor can be retrieved on the source node by running: /opt/resmon/bin/resdata -r <resource name> \ -R <request id> [-n <notify id>] -m 10) The notification trigger indicates if the resource condition is normal or not. For an EMSProblemEvent trap, the notification trigger is abnormal. 11) The event type indicates the type of notification being sent. The different types are: Poll - for notification at every interval Change - for notification when the value changes Normal - for notification when the threshold condition for the resource is not true Problem - for notification when the threshold condition for the resource is true Error - for notification when the monitor encountered an error determining the resource value 12) The notify id, a unique identifier for a specific notification event. This value should be used when using resdata to retrieve additional information about the event. Monitor data can be retrieved on the source node by running: /opt/resmon/bin/resdata -r <resource name> \ -R <request id> [-n <notify id>] -m Variables: 1: hpEMSResourceName 2: hpEMSRequestID 3: hpEMSOperator 4: hpEMSResourceType 5: hpEMSResourceValue 6: hpEMSThresholdType 7: hpEMSThresholdValue 8: hpEMSUserDataFlag 9: hpEMSMonitorDataFlag 10: hpEMSNotificationTrigger 11: hpEMSEventType 12: hpEMSNotifyID EDESC EVENT hpEMSMonitorReboot .1.3.6.1.4.1.11.2.3.1.7.0.3 "Status Events" WARNING FORMAT The Event Monitoring Service (EMS) has generated an event $* SDESC The Event Monitoring Service (EMS) has generated an event for a monitored resource. A Monitor Reboot Event occurs when monitors are restarted due to a system reboot. The list of resources affected by the restart can be retrieved on the source node by running: /opt/resmon/bin/resdata -M <key> The data passed with the event: 1) The restart event type, which can be restart or reboot. For an EMSMonitorReboot trap, the restart type is reboot. 2) The title of the monitor that is restarted. 3) The command used to restart the monitor. 4) The name of the vendor that provided the monitor. 5) The version of the monitor. 6) The process ID of the restarted monitor process. 7) The monitor key, which may be used with the -M option to the resdata command to return the list of resources being monitored by the restarted monitor. The list of resources can be retrieved on the source node by running: /opt/resmon/bin/resdata -M <monitor key> Variables: 1: hpEMSRestartType 2: hpEMSMonitorTitle 3: hpEMSCommand 4: hpEMSVendor 5: hpEMSVersion 6: hpEMSPID 7: hpEMSMonitorKey EDESC EVENT hpEMSMonitorRestart .1.3.6.1.4.1.11.2.3.1.7.0.4 "Status Events" OK FORMAT The Event Monitoring Service (EMS) has generated an event $* SDESC The Event Monitoring Service (EMS) has generated an event for a monitored resource. A Monitor Restart Event occurs when EMS detects that a required monitor is no longer running, and restarts the monitor. The list of resources affected by the restart can be retrieved on the source node by running: /opt/resmon/bin/resdata -M <key> The data passed with the event: 1) The restart event type, which can be restart or reboot. For an EMSMonitorRestart trap, the restart type is restart. 2) The title of the monitor that is restarted. 3) The command used to restart the monitor. 4) The name of the vendor that provided the monitor. 5) The version of the monitor. 6) The process ID of the restarted monitor process. 7) The monitor key, which may be used with the -M option to the resdata command to return the list of resources being monitored by the restarted monitor. The list of resources can be retrieved on the source node by running: /opt/resmon/bin/resdata -M <monitor key> Variables: 1: hpEMSRestartType 2: hpEMSMonitorTitle 3: hpEMSCommand 4: hpEMSVendor 5: hpEMSVersion 6: hpEMSPID 7: hpEMSMonitorKey EDESC EVENT hpEMSMonitorRestart .1.3.6.1.4.1.11.2.3.1.7.0.4 "Status Events" OK FORMAT The Event Monitoring Service (EMS) has generated an event $* SDESC The Event Monitoring Service (EMS) has generated an event for a monitored resource. A Monitor Restart Event occurs when EMS detects that a required monitor is no longer running, and restarts the monitor. The list of resources affected by the restart can be retrieved on the source node by running: /opt/resmon/bin/resdata -M <key> The data passed with the event: 1) The restart event type, which can be restart or reboot. For an EMSMonitorRestart trap, the restart type is restart. 2) The title of the monitor that is restarted. 3) The command used to restart the monitor. 4) The name of the vendor that provided the monitor. 5) The version of the monitor. 6) The process ID of the restarted monitor process. 7) The monitor key, which may be used with the -M option to the resdata command to return the list of resources being monitored by the restarted monitor. The list of resources can be retrieved on the source node by running: /opt/resmon/bin/resdata -M <monitor key> Variables: 1: hpEMSRestartType 2: hpEMSMonitorTitle 3: hpEMSCommand 4: hpEMSVendor 5: hpEMSVersion 6: hpEMSPID 7: hpEMSMonitorKey EDESC EVENT hpEMSNormalSevEvent .1.3.6.1.4.1.11.2.3.1.7.0.5 "Status Events" OK FORMAT The Event Monitoring Service (EMS) has generated an event $* SDESC The Event Monitoring Service (EMS) has generated an event for a monitored resource. A Problem Event occurs when the threshold condition defined for the resource is true. A Change Event occurs when the monitored value changes. Monitoring requests configured for notification when the value changes may generate this event. A Poll Event occurs regularly at the configured polling interval. An Error Event occurs when the value of a monitored resource cannot be obtained from the monitor. The data passed with the event: 1) The name of the resource being monitored. 2) The request id, a unique identifier for the monitoring request. This value should be used when using resdata to retrieve additional information about the event. 3) The operator used by EMS to determine when event notifications should be sent. Possible values include: poll, change, >, >=, <, <=, = and !=. 4) The resource type, which defines the type of value being monitored. Possible values include: string, enumerated, integer, and float. 5) The resource value, which is the current value of the resource being monitored. It is converted based on the resource type. 6) The threshold type (usually the same as the resource type) defines the type of value configured for the threshold. Possible values include: string, integer, and float. 7) The threshold value configured for the resource being monitored. 8) The user data flag, which indicates whether or not user data are available. User data are comments provided by the user when the request was configured. User data can be retrieved on the source node by running: /opt/resmon/bin/resdata -r <resource name> \ -R <request id> -u 9) The monitor data flag, which indicates whether or not the monitor has additional data regarding the event. Additional data provided by the resource monitor can be retrieved on the source node by running: /opt/resmon/bin/resdata -r <resource name> \ -R <request id> [-n <notify id>] -m 10) The notification trigger indicates if the resource condition is normal or not. For an EMSProblemEvent trap, the notification trigger is abnormal. 11) The event type indicates the type of notification being sent. The different types are: Poll - for notification at every interval Change - for notification when the value changes Normal - for notification when the threshold condition for the resource is not true Problem - for notification when the threshold condition for the resource is true Error - for notification when the monitor encountered an error determining the resource value 12) The notify id, a unique identifier for a specific notification event. This value should be used when using resdata to retrieve additional information about the event. Monitor data can be retrieved on the source node by running: /opt/resmon/bin/resdata -r <resource name> \ -R <request id> [-n <notify id>] -m Variables: 1: hpEMSResourceName 2: hpEMSRequestID 3: hpEMSOperator 4: hpEMSResourceType 5: hpEMSResourceValue 6: hpEMSThresholdType 7: hpEMSThresholdValue 8: hpEMSUserDataFlag 9: hpEMSMonitorDataFlag 10: hpEMSNotificationTrigger 11: hpEMSEventType 12: hpEMSNotifyID EDESC EVENT hpEMSWarningEvent .1.3.6.1.4.1.11.2.3.1.7.0.6 "Status Events" WARNING FORMAT The Event Monitoring Service (EMS) has generated an event $* SDESC The Event Monitoring Service (EMS) has generated an event for a monitored resource. A Problem Event occurs when the threshold condition defined for the resource is true. A Change Event occurs when the monitored value changes. Monitoring requests configured for notification when the value changes may generate this event. A Poll Event occurs regularly at the configured polling interval. An Error Event occurs when the value of a monitored resource cannot be obtained from the monitor. The data passed with the event: 1) The name of the resource being monitored. 2) The request id, a unique identifier for the monitoring request. This value should be used when using resdata to retrieve additional information about the event. 3) The operator used by EMS to determine when event notifications should be sent. Possible values include: poll, change, >, >=, <, <=, = and !=. 4) The resource type, which defines the type of value being monitored. Possible values include: string, enumerated, integer, and float. 5) The resource value, which is the current value of the resource being monitored. It is converted based on the resource type. 6) The threshold type (usually the same as the resource type) defines the type of value configured for the threshold. Possible values include: string, integer, and float. 7) The threshold value configured for the resource being monitored. 8) The user data flag, which indicates whether or not user data are available. User data are comments provided by the user when the request was configured. User data can be retrieved on the source node by running: /opt/resmon/bin/resdata -r <resource name> \ -R <request id> -u 9) The monitor data flag, which indicates whether or not the monitor has additional data regarding the event. Additional data provided by the resource monitor can be retrieved on the source node by running: /opt/resmon/bin/resdata -r <resource name> \ -R <request id> [-n <notify id>] -m 10) The notification trigger indicates if the resource condition is normal or not. For an EMSProblemEvent trap, the notification trigger is abnormal. 11) The event type indicates the type of notification being sent. The different types are: Poll - for notification at every interval Change - for notification when the value changes Normal - for notification when the threshold condition for the resource is not true Problem - for notification when the threshold condition for the resource is true Error - for notification when the monitor encountered an error determining the resource value 12) The notify id, a unique identifier for a specific notification event. This value should be used when using resdata to retrieve additional information about the event. Monitor data can be retrieved on the source node by running: /opt/resmon/bin/resdata -r <resource name> \ -R <request id> [-n <notify id>] -m Variables: 1: hpEMSResourceName 2: hpEMSRequestID 3: hpEMSOperator 4: hpEMSResourceType 5: hpEMSResourceValue 6: hpEMSThresholdType 7: hpEMSThresholdValue 8: hpEMSUserDataFlag 9: hpEMSMonitorDataFlag 10: hpEMSNotificationTrigger 11: hpEMSEventType 12: hpEMSNotifyID EDESC EVENT hpEMSMinorEvent .1.3.6.1.4.1.11.2.3.1.7.0.7 "Status Events" CRITICAL FORMAT The Event Monitoring Service (EMS) has generated an event $* SDESC The Event Monitoring Service (EMS) has generated an event for a monitored resource. A Problem Event occurs when the threshold condition defined for the resource is true. A Change Event occurs when the monitored value changes. Monitoring requests configured for notification when the value changes may generate this event. A Poll Event occurs regularly at the configured polling interval. An Error Event occurs when the value of a monitored resource cannot be obtained from the monitor. The data passed with the event: 1) The name of the resource being monitored. 2) The request id, a unique identifier for the monitoring request. This value should be used when using resdata to retrieve additional information about the event. 3) The operator used by EMS to determine when event notifications should be sent. Possible values include: poll, change, >, >=, <, <=, = and !=. 4) The resource type, which defines the type of value being monitored. Possible values include: string, enumerated, integer, and float. 5) The resource value, which is the current value of the resource being monitored. It is converted based on the resource type. 6) The threshold type (usually the same as the resource type) defines the type of value configured for the threshold. Possible values include: string, integer, and float. 7) The threshold value configured for the resource being monitored. 8) The user data flag, which indicates whether or not user data are available. User data are comments provided by the user when the request was configured. User data can be retrieved on the source node by running: /opt/resmon/bin/resdata -r <resource name> \ -R <request id> -u 9) The monitor data flag, which indicates whether or not the monitor has additional data regarding the event. Additional data provided by the resource monitor can be retrieved on the source node by running: /opt/resmon/bin/resdata -r <resource name> \ -R <request id> [-n <notify id>] -m 10) The notification trigger indicates if the resource condition is normal or not. For an EMSProblemEvent trap, the notification trigger is abnormal. 11) The event type indicates the type of notification being sent. The different types are: Poll - for notification at every interval Change - for notification when the value changes Normal - for notification when the threshold condition for the resource is not true Problem - for notification when the threshold condition for the resource is true Error - for notification when the monitor encountered an error determining the resource value 12) The notify id, a unique identifier for a specific notification event. This value should be used when using resdata to retrieve additional information about the event. Monitor data can be retrieved on the source node by running: /opt/resmon/bin/resdata -r <resource name> \ -R <request id> [-n <notify id>] -m Variables: 1: hpEMSResourceName 2: hpEMSRequestID 3: hpEMSOperator 4: hpEMSResourceType 5: hpEMSResourceValue 6: hpEMSThresholdType 7: hpEMSThresholdValue 8: hpEMSUserDataFlag 9: hpEMSMonitorDataFlag 10: hpEMSNotificationTrigger 11: hpEMSEventType 12: hpEMSNotifyID EDESC EVENT hpEMSMajorEvent .1.3.6.1.4.1.11.2.3.1.7.0.8 "Status Events" CRITICAL FORMAT The Event Monitoring Service (EMS) has generated an event $* SDESC The Event Monitoring Service (EMS) has generated an event for a monitored resource. A Problem Event occurs when the threshold condition defined for the resource is true. A Change Event occurs when the monitored value changes. Monitoring requests configured for notification when the value changes may generate this event. A Poll Event occurs regularly at the configured polling interval. An Error Event occurs when the value of a monitored resource cannot be obtained from the monitor. The data passed with the event: 1) The name of the resource being monitored. 2) The request id, a unique identifier for the monitoring request. This value should be used when using resdata to retrieve additional information about the event. 3) The operator used by EMS to determine when event notifications should be sent. Possible values include: poll, change, >, >=, <, <=, = and !=. 4) The resource type, which defines the type of value being monitored. Possible values include: string, enumerated, integer, and float. 5) The resource value, which is the current value of the resource being monitored. It is converted based on the resource type. 6) The threshold type (usually the same as the resource type) defines the type of value configured for the threshold. Possible values include: string, integer, and float. 7) The threshold value configured for the resource being monitored. 8) The user data flag, which indicates whether or not user data are available. User data are comments provided by the user when the request was configured. User data can be retrieved on the source node by running: /opt/resmon/bin/resdata -r <resource name> \ -R <request id> -u 9) The monitor data flag, which indicates whether or not the monitor has additional data regarding the event. Additional data provided by the resource monitor can be retrieved on the source node by running: /opt/resmon/bin/resdata -r <resource name> \ -R <request id> [-n <notify id>] -m 10) The notification trigger indicates if the resource condition is normal or not. For an EMSProblemEvent trap, the notification trigger is abnormal. 11) The event type indicates the type of notification being sent. The different types are: Poll - for notification at every interval Change - for notification when the value changes Normal - for notification when the threshold condition for the resource is not true Problem - for notification when the threshold condition for the resource is true Error - for notification when the monitor encountered an error determining the resource value 12) The notify id, a unique identifier for a specific notification event. This value should be used when using resdata to retrieve additional information about the event. Monitor data can be retrieved on the source node by running: /opt/resmon/bin/resdata -r <resource name> \ -R <request id> [-n <notify id>] -m Variables: 1: hpEMSResourceName 2: hpEMSRequestID 3: hpEMSOperator 4: hpEMSResourceType 5: hpEMSResourceValue 6: hpEMSThresholdType 7: hpEMSThresholdValue 8: hpEMSUserDataFlag 9: hpEMSMonitorDataFlag 10: hpEMSNotificationTrigger 11: hpEMSEventType 12: hpEMSNotifyID EDESC EVENT hpEMSCriticalEvent .1.3.6.1.4.1.11.2.3.1.7.0.9 "Status Events" CRITICAL FORMAT The Event Monitoring Service (EMS) has generated an event $* SDESC The Event Monitoring Service (EMS) has generated an event for a monitored resource. A Problem Event occurs when the threshold condition defined for the resource is true. A Change Event occurs when the monitored value changes. Monitoring requests configured for notification when the value changes may generate this event. A Poll Event occurs regularly at the configured polling interval. An Error Event occurs when the value of a monitored resource cannot be obtained from the monitor. The data passed with the event: 1) The name of the resource being monitored. 2) The request id, a unique identifier for the monitoring request. This value should be used when using resdata to retrieve additional information about the event. 3) The operator used by EMS to determine when event notifications should be sent. Possible values include: poll, change, >, >=, <, <=, = and !=. 4) The resource type, which defines the type of value being monitored. Possible values include: string, enumerated, integer, and float. 5) The resource value, which is the current value of the resource being monitored. It is converted based on the resource type. 6) The threshold type (usually the same as the resource type) defines the type of value configured for the threshold. Possible values include: string, integer, and float. 7) The threshold value configured for the resource being monitored. 8) The user data flag, which indicates whether or not user data are available. User data are comments provided by the user when the request was configured. User data can be retrieved on the source node by running: /opt/resmon/bin/resdata -r <resource name> \ -R <request id> -u 9) The monitor data flag, which indicates whether or not the monitor has additional data regarding the event. Additional data provided by the resource monitor can be retrieved on the source node by running: /opt/resmon/bin/resdata -r <resource name> \ -R <request id> [-n <notify id>] -m 10) The notification trigger indicates if the resource condition is normal or not. For an EMSProblemEvent trap, the notification trigger is abnormal. 11) The event type indicates the type of notification being sent. The different types are: Poll - for notification at every interval Change - for notification when the value changes Normal - for notification when the threshold condition for the resource is not true Problem - for notification when the threshold condition for the resource is true Error - for notification when the monitor encountered an error determining the resource value 12) The notify id, a unique identifier for a specific notification event. This value should be used when using resdata to retrieve additional information about the event. Monitor data can be retrieved on the source node by running: /opt/resmon/bin/resdata -r <resource name> \ -R <request id> [-n <notify id>] -m Variables: 1: hpEMSResourceName 2: hpEMSRequestID 3: hpEMSOperator 4: hpEMSResourceType 5: hpEMSResourceValue 6: hpEMSThresholdType 7: hpEMSThresholdValue 8: hpEMSUserDataFlag 9: hpEMSMonitorDataFlag 10: hpEMSNotificationTrigger 11: hpEMSEventType 12: hpEMSNotifyID EDESC
Bemerkung
